Shoes for Hammertoes: How the Right Fit Relieves a Bent Toe Joint
If you have a toe that bends at the middle joint and rubs against the top of your shoes, you are dealing with one of the most common - and most footwear-sensitive - foot conditions there is. Hammertoes are shaped by what we put our feet into, and the wrong shoe can turn a manageable bend into a painful, fixed one.
At Sargasso & Grey, our shoes are built on custom wide-fit lasts, crafted in soft leather and suede, and finished with cushioned insoles - a combination that matters enormously if you have hammertoes. Below, we explain what they are, what causes them, what to look for in a shoe, and which of our current styles are best suited to a bent toe joint.
What Is a Hammertoe?

A hammertoe is a deformity in which one of the toes - most commonly the second toe - bends abnormally at the middle joint, causing it to point downward like a claw rather than lying flat. The condition is often made worse by shoes that are too narrow, too shallow, or too tightly fitted through the toe box, and improves significantly with footwear built around a wider, roomier toe area with a soft upper that gives over the raised joint.
When a hammertoe occurs, the muscles and tendons that normally hold a toe straight become imbalanced, causing the middle joint of the toe to bend upward while the tip points down. In the early stages the toe remains flexible and can still be straightened by hand. Over time, this bent position can become fixed, meaning the toe no longer straightens fully even when the shoe is removed.
It is typically accompanied by a hard corn or callus on top of the bent joint, caused by repeated friction against the inside of a shoe - which is why the top of the toe box, not just its width, matters so much.
Hammertoe vs. Bunion: What's the Difference?

Hammertoes are distinct from bunions, though the two often occur together. A bunion (hallux valgus) affects the big toe joint and pushes it inward toward the other toes; a hammertoe affects the middle joint of one of the smaller toes and bends it out of alignment. You can have one without the other, but tight, narrow footwear is a contributing factor to both - which is why a shoe that helps one usually helps the other.
What Causes Hammertoes?
Footwear that is too short or too narrow - forces the toes into a bent position to fit within the shoe, over time encouraging the joint to stay that way.
Shallow toe boxes - if there is not enough room above them for them to lie flat.
High heels - shift weight forward onto the forefoot, increasing pressure and pushing the toes against the front of the shoe.
Muscle or tendon imbalance - sometimes structural, sometimes related to conditions such as arthritis or diabetes.
Previous toe injury - a stubbed, broken or dislocated toe can leave the joint prone to bending.
Genetics - a tendency toward hammertoes can run in families, independent of footwear choices.
Hammertoes are often common in later life. The Framingham Foot Study, which physically examined the feet of 2,445 adults with an average age of 68, found hammer toe present in 18% of feet. Notably, while bunions were more than twice as common in women as in men in the same sample (34% against 15%), hammer toes occurred at almost identical rates in both - which suggests that the lifetime footwear explanation so often applied to bunions may not tell the whole story for the lesser toes.
Podiatrists attribute the rise with age to two changes in particular. The natural fat padding beneath the ball of the foot thins over time, leaving less cushioning between bone and ground, and the muscles and tendons that hold the toes straight tend to grow progressively more imbalanced. Hammertoes are also frequently seen alongside bunions, arthritis and other structural changes in the foot.
What Makes a Shoe Good for Hammertoes?
Before looking at styles, it is worth understanding what to look for - because a shoe marketed as wide is not automatically a good shoe for a bent toe joint.
A genuine wide-fit last
The shoe must be intentionally wide through the forefoot, not a standard last with a slightly stretched upper.
Room above the toes, not just beside them
A hammertoe rises upward, so the space over the toes is as important as the width across them.
A soft, natural upper
Leather and suede flex and give around a raised joint, where synthetic materials hold a rigid shape and press back. They are also more breathable than synthetic kinds, and are less likely to rub.
Protection at the point of friction
Cushioning between the upper and the top of the bent joint prevents the corns and calluses that cause most of the day-to-day pain.
A low, stable heel
Flats and low heels keep weight off the forefoot; where a heel is wanted, a platform reduces the pitch and the pressure that comes with it.
Cushioning under the ball of the foot
Hammertoes often come with forefoot pain, as the bent toe stops taking its share of the load.
Our proprietary Smooth & Soothe foam panels are built in around the toe box on many of our styles, sitting hidden between the upper and the foot to soften contact exactly where a bent joint would otherwise rub.
At a glance: what helps and what hurts
| Shoe feature | Helps a hammertoe | Makes it worse |
|---|---|---|
| Toe box width | Genuine wide fit last with room across the forefoot | A forefoot narrower than your own foot |
| Depth over the toes | Deep, rounded or square toe box | Shallow toe box that presses on the raised joint |
| Upper material | Soft leather or suede that gives | Stiff synthetic that holds its shape |
| Heel | Flat, low, or a platform to cut the pitch | A high, steep, thin heel that loads the forefoot with pressure |
| Cushioning | Padded insole under the ball of the foot, with padding over the joint |
Thin, flat insole with no forefoot support |
Best Sargasso & Grey Styles for Hammertoes
Here is how some of our styles deliver on the features above.
Style |
Type |
Heel / platform |
Why it suits a hammertoe |
|---|---|---|---|
| Elkie | Heeled sandal |
6.5cm thick heel on a 2cm platform |
The platform cuts the effective pitch so less weight drives onto the toes; wide-fit last and soft upper give room over the joint. |
| Christina | Flat shoe | Flat | Extra-wide toe box with ultra soft suede giving the upper lots of flexibility. Fitted with our signature Smooth and Soothe foam panel, the top of the toes are coated with padding. |
| Lou | Kitten heel | Micro heel | Providing ample room in the toe box, as well as coverage, this soft style will not press on the toes. Less pressure is placed on the forefoot with the micro heel design. |
| Koto | Boot | Flat/chunky sole | An extra roomy style, this style allows the toes to sit and breathe comfortably. The smart, lightweight design ensures less weight is dragging the foot down. |
| Hope | Moccasin | Flat / low | A lovely and flexible wide-fit style, this shoe will move naturally with your foot. Memory foam padded insoles make sure your feet are padded from underneath. |
Tips for Managing Hammertoes Day to Day
Even the right shoes work better alongside a few simple habits.
- Fit shoes later in the day - feet are at their largest in the afternoon and evening, so a shoe tried on first thing can feel tight by 4pm.
- Use a gel or silicone toe pad over the joint - think of this as a make-shift Smooth and Soothe panel for your shoes that don't have one built in. This is an inexpensive way to reduce friction on an existing corn while the joint is still flexible.
- Keep the joint moving - gentle toe stretches and picking up a towel with your toes help maintain flexibility in the earlier stages, before the joint stiffens.
- Do not cut or file a corn yourself - a podiatrist can remove hard skin safely; home attempts risk infection, particularly if you have diabetes or reduced circulation.
- Alternate your shoes - rotating between styles varies exactly where the upper contacts the joint, and lets natural materials and cushioning recover between wears.
When to See a Podiatrist
Speak to a podiatrist if the toe has become stiff and no longer straightens on its own, if a corn or callus keeps returning or becomes painful, if the skin over the joint breaks down, or if you have diabetes or poor circulation and notice any change in your feet. A podiatrist can assess how flexible the joint still is, remove hard skin safely, and advise on padding, orthoses or - if needed - whether a surgical opinion is worthwhile. Footwear helps enormously, but it is not a substitute for a professional assessment when a toe is changing.
Frequently Asked Questions
What is a hammertoe? A hammertoe is a deformity in which a toe - most often the second toe - bends abnormally at the middle joint so that it points downward rather than lying flat. It is frequently accompanied by a corn or callus on top of the bent joint, caused by friction against the inside of a shoe.
What causes hammertoes? The most common contributing factor is footwear that is too narrow, too short, or too shallow through the toe box, which forces the toes into a bent position. High heels compound this by pushing weight forward onto the forefoot. Genetics, muscle and tendon imbalance, previous toe injury, and conditions such as arthritis and diabetes can also play a role.
What shoes are best for hammertoes? Shoes with a wide, roomy toe box, a soft and flexible leather or suede upper, a rounded or square toe shape, a low heel, and cushioned insoles at the forefoot are best. These features reduce the pressure and friction on the bent joint that narrow, stiff, pointed or high-heeled shoes would otherwise cause.
Can hammertoes be fixed without surgery? In the earlier, more flexible stages, appropriate footwear, padding and toe exercises can help manage symptoms and slow progression. Once a hammertoe becomes rigid, non-surgical options tend to focus on comfort and pressure relief rather than reversing the deformity. Anyone concerned about a hammertoe should speak to a podiatrist for an assessment specific to their foot.
Can you wear heels with hammertoes? Heels are not automatically off limits, but height and pitch matter more than the heel itself. A platform sole reduces the drop between heel and forefoot, so less weight is driven onto the toes - Elkie's 2cm platform beneath a 6.5cm heel is a good example. A low microheel or block heel with a wide, covered toe box is generally more comfortable than a flat with a narrow toe.
Do hammertoes need a wide fit or an extra wide fit shoe? It depends on the width of your foot as well as the toe itself. A hammertoe needs more room that what is standard and genuine wide-fit shoes can help massively. However, one of the most important factors is having a soft and giving upper, especially if a shoe isn't made with extra depth. Sargasso & Grey shoes are made in wide fittings from EE to EEE, all on genuine wide-fit lasts in premium leathers and suedes.
Are hammertoes and bunions the same thing? No. A bunion affects the big toe joint, pushing it inward toward the other toes, while a hammertoe affects the middle joint of a smaller toe and bends it downward. They often occur together and share footwear as a contributing factor, but they are separate conditions.


